HyperCharger® Fuel Controller

 


HyperCharger® Fuel Controllers

 

This item is a brand new piggyback Airflow/Fuel computer from LeBeaux Technologies. This converter controls the amount of fuel that your vehicle uses by changing the airflow signal to the ECM MAF input. Tuning is very simple, and accomplished by progressing through the settings menu. The output frequency can be changed up to 150% of the original, which will cause your vehicle to run rich. This may be ideal if you are running a dry NOS system. The airflow frequency can also be decreased down to 25% of the original frequency, which can allow for HHO injection, bigger injectors or any other increase in fuel system delivery capacity. Decreasing the airflow signal causes the ECM to inject less fuel than stock value.

The system can handle many domestic and import MAS systems, as well as speed density systems. The system currently handles GM MAF, Mitsubishis MAS, most import Kaman vortex MAS, many analog VAM, and MAP (speed density) systems. If you are not sure if your vehicle is currently supported, or you need a custom application please contact us directly, and feel free to download and try our free demo software. The LeBeaux system is the most sophisticated system on the market, using fuzzy logic programming, and neural networks to learn your vehicle's characteristics. The LeBeaux system allows higher tunability then most systems out there. Installation is carried out easily with quick splice connectors or passive wire stripping technique, soldering and proper tape or tube sealing.

This system is designed for off-road use only, and just like any performance item, can lead to damage if not tuned properly. It is suggested that the installation be done by a certified technician. Data logging is highly recommend and is the only way to tell exactly what your ECM is reading. LeBeaux Technologies holds no responsibility for installation and use of this product and only offers refunds on un-installed units or defective units.

THIS SYSTEM INCLUDES


* 1 CONTROLLER UNIT
* 1 Wiring Harness
* 1 Interface cable (Basic PC Setup)

 


3G Basic System Components

 


3G Display System Components

 


Connections and indicators

 


Frequency based MAF Installation wiring diagram

 


Analog MAF MAP Installation wiring diagram

 


Download the Free demo of this software

 

 

Updates

 


Copyright © 2005 - 2009 LEBEAUX LLC. All rights reserved.

Home
Site Map